Senti Paint - spray paint for bilges & lockers

Spray paint for bilges and boat hatches

Is your boat affected by soiled or discoloured bilges and boat hatches? These areas are often enclosed and therefore susceptible to moisture and mould. With Senti Paint spray paint for bilges, you give bilges, hatches and lockers a fresh, new appearance again.

This high-quality spray paint has been specially developed for internal surfaces of fibreglass hulls and is resistant to fuels, oils, seawater and aggressive cleaning agents. This makes Senti Paint a solution for the maintenance and protection of your boat.

Features

• Special spray paint for bilges, boat hatches/lockers and engine compartments
• Resistant to fuels, oils, seawater and cleaning agents
• Provides a durable, fresh appearance
• Available in RAL 9010 (white) and RAL 7045 (grey)
  

Instructions for use

Clean the surface thoroughly with Senti New and rinse with clean water. Dry the surface and sand with 180-220 grit. Carefully remove residues. Apply 1-2 coats of Senti Paint. Drying time at 15 °C is 8 hours and the surface is dust-free after 5 minutes. The application temperature is +10 °C to 40 °C.

Application area

Bilges, lockers, hatches, engine compartments and other polyester surfaces on the inside of the boat.

Contents

500 ml